Measurement and adjustment of the pump include alignment

Measurement and adjustment of the pump include alignment, looking for elevation and leveling three areas.(1) vertical alignment is to find the positive engagement of the gear pump is electric, horizontal centerline. Longitudinal centerline of the gear meshing electric external gear pump is based on the shaft centerline prevail; transverse centerline to centerline of the outlet pipe shall prevail. When in alignment, the mounted device according to the center line (or center line of the stud and base) to be measured and adjusted so that the longitudinal engagement of the manual fuel transfer pump motor, and meet the requirements of the drawing of the transverse center line, and with well connected to other devices. Internal gear meshing vertical electric pump, the horizontal centerline by drawing dimension tolerances within ± 5mm range.Is the shaft centerline elevation (2) to find the elevation of the petrol dispenser pump prevail. Generally used to measure the water level when looking for elevation. When measuring, the benchmark reference point on the plant settings, measured water level of the mounted height, and then moved to the journal benchmark, measure the distance from the shaft surface mounted to, and then the pump can be calculated according to the formula shaft centerline elevation.