Electronic dispenser installed before use to do the work

Now more and more industrial and mining enterprises, oil vehicles and the need to use a small fuel dispenser refueling equipment, its lightweight and flexible, and easy to carry more of the users of all ages. However, many users in the purchase of small portable fuel dispenser, due to a defect on the knowledge or skills, do not know how to install and use a tripod for this machine to give you guidance on January:
1. Install the transparent tube: Transparent tube is used to see if there is full and can not have bubbles, otherwise it will affect the accuracy of the measurement. The transparent tube connected cng fuel dispenser into port, the other end of the filter, and fixed by hoops.
2. The activities of the two black tubing connector: Connect one end of refueling guns, and the other end connected to the electronic dispenser. Attention must be sealed to prevent oil spills, leaks.
3. energized: positive and negative poles, the positive is red clip, clip the negative is black, and the corresponding power supply. Note To ensure contact with a solid, otherwise the computer memory will be wrong.
Press "system is cleared when the pipe is full of oil, press the" Stop Go "after; 4. the first refueling, press the" Start refueling "button, open the grease guns, since there is no oil pipeline, the air flow will be a few counts "button to be cleared. This concludes the entire fuel dispenser installation process.