gear pump

Elevation adjustment is accomplished with an electric washer engaging the internal gear pump decrease RYB legs and between the base. Shaft center rib elevation deviation of ± 10mm. Internal gear meshing leveling RYB electric pump centerline to find a good location and elevation, they start to adjust the level of RYB electric gear pump inside, first with fine age 0.05mm / m square meter level, in RYB electric internal gear type pump measurements performed on front and rear ends of the spigot. Adjust the level, you can add and subtract thin metal meshing between thefuel pump dispenser foot and the base unit within the RYB electric adjustment. Level of engagement within RYB electric gear pump allowable deviation is generally 0.3-0.5mm / m. Internal gear meshing electric pump centerline position, elevation and level of degree to find a good post, you can connect an electric bolt engaging RYB internal gear pump and tighten the base, then use a level to check whether there are changes in its level, if no change, you can install the motor. The main job is to mount the motor to the center line of the motor shaft and the centrifugal pump is adjusted to the center line of the shaft in a straight line.