HTF large pump noise Cause Analysis

Conducting oil mechanical pump, heat pump noisy mainly due to bearing damage or thermal oil circulation pump cavitation phenomena due to high temperatures and thermal oil pump vibration generated support causes of instability caused due to long-term contact HTF pump operation, users use during the course of the oil bearing chamber is not changed frequently, resulting in long-term high-speed bearing long-term operation in the case of poor lubrication conditions caused by thermal oil pump bearing failure, which is conducting oil pump noise. HTF pump should be maintained on a regular basis in daily production, cleaning, the timely replacement of the bearing housing to the bearing lubrication oil. Once the bearing is damaged bearings should be replaced to avoid damage to the pump to produce other components. in addition, the newly installed clients in the use of thermal oil pumps are often used for the first temperature rise too fast or oil rise too high. This will cause HTF produce gas in the pipeline, will instantly explode when these gases in the process of conducting oil pump delivery cycle by conducting oil pump, so when conducting oil pump noise. HTF pump should be used for the first time, the oil should rise slowly and start conducting oil pump, gradually open the inner pipe vent pipe cleaner exhaust gas after the official use thermal diesel hand pump. Yet another is conducting oil pump is installed and export pipeline is not marked anchor or anchor cause instability when using thermal oil pump generates a huge pipe resonance, it will generate noise. it should be a solid pipeline of timely support. I have many years of conducting oil pump production history, production specifications, product safety, long service life can be for the majority of thermal oil pumps provide customers with strong technical guidance free of charge. welcome customers to buy our products conducting oil pump.